EPCON G5 High Strength Epoxy Adhesive
Product Advantages
| > |
High strength epoxy |
| > |
Fire rated: tested up to 4 hours FRP |
| > |
Shorter curing time with extended working time |
| > |
Works in damp holes and underwater applications |
| > |
Low shrinkage, suitable for cored and oversized holes |
| > |
Virtually odorless, can be used indoors |
| > |
Re-sealable tip |
| > |
Approved for cracked concrete and all seismic zones |
Applications
| > |
Reinforcing and starter bars |
| > |
Underwater fixings |
| > |
Diaphragm wall fixings |
| > |
Guard rail fixings |
| > |
Parapet wall fixings |
| > |
Tunnel fixings |
| > |
Floor slabs |
| > |
Drill correct diameter hole to recommended depth. |
| > |
Clean hole thoroughly with brush and air pump 3~4 times. |
| > |
Assemble nozzle onto cartridge. Dispense and discard enough chemical until uniform mix is achieved. Inject from the bottom of the hole gradually, filling in until 40% full. |
| > |
Insert the rod/stud by hand to full depth, using slow rotating movement. |
| > |
Allow EPCON G5 to cure for specified period before loading. |
Product Range
| Part No. |
Description |
| G5 |
EPCON G5 (650ml) |
| E55 |
Nozzle for EPCON G5 |
| E102 |
Dispensing Tool for EPCON G5 |
Product pages - Chemical Anchors.pdf