|
|
Trubolt Stud Anchors
Product Advantages
| > |
Load assisted through fixing |
| > |
Anti-rotation expansion sleeve |
| > |
Drill bit required is same diameter as anchor |
| > |
Expansion sleeve design ensures maximum expansion |
| > |
Maximium shear capacity for hole size as the stud diameter equals the hole diameter |
| > |
Improved efficiency with fewer hammer blows and turns for installation |
Applications
| > |
Structural beams and columns |
| > |
Wall to floor framework |
| > |
Steel to concrete |
| > |
Pallet racking and guards |
| > |
Lift rails |
| > |
Stadium seating |
| > |
Safety barriers |
| > |
GRC facade fixing |
| > |
Marble and facade fixings |
| > |
Drill the correct diameter hole and depth. |
| > |
Remove debris from hole by blowing out with compressed air or hand held blow out pump. |
| > |
Install the anchor in the hole with a hammer until washer seats on fixture. |
| > |
Tighten bolt with a torque wrench to recommended assembly torque. |
Product Range
| |
Type |
Sizes |
 |
Zinc Plated |
M6 to M20 |
 |
Hot Dip Galvanized |
M8 to M20 |
 |
Stainless Steel A4 |
M6 to M20 |
|
|
Product pages - Stud Anchors.pdf