Triga Z - Heavy Duty Structural Anchors
Product Advantages
| > |
Heavy duty torque controlled anchors for use in concrete over |
| > |
Through fixing – no marking out and repositioning |
| > |
Fully assembled |
| > |
Variety of head styles |
| > |
Metal “collapse system” sleeve. Patented Z shaped anti-rotation and Z shape shearing |
| > |
Thick wall steel spacer – increased resistance of shear forces |
| > |
High shear and tensile capacity, Grade 8.8 steel bolt and threaded rod |
| > |
Suitable for cracked or non-cracked concrete (ETA) |
Applications
| > |
Structural steel columns |
| > |
Steel beams |
| > |
Holding down machinery |
| > |
Steel bollards |
| > |
Industrial doors |
| > |
Fixing of pre-cast units |
| > |
Drill the correct diameter hole and depth. |
| > |
Remove debris from hole by blowing out with compressed air or hand held blow out pump. |
| > |
Install the anchor in the hole with a hammer until washer seats on fixture. |
| > |
Tighten bolt with a torque wrench to recommended assembly torque. |
Product Range
| |
Type |
Sizes |
 |
Bolt Head - Zinc Plated |
M6 to M20 |
 |
Stud Head - Zinc Plated |
M6 to M20 |
 |
Stud Head - Stainless Steel A4 |
M8 to M16 |
 |
Countersunk Head - Zinc Plated |
M8 to M12 |
 |
Pig Tail and Ring Version |
M12 |
Product pages - Heavy Duty Anchors.pdf