MCM Construction Materials Supply Company Limited 萬斯美有限公司

KEIL

Undercut Technology

Home » PRODUCTS » Fastening Technology » KEIL »

Undercut Technology

KEIL Undercut Anchor

The KEIL undercut anchor, for invisible attachment of thin panels, is manufactured from stainless steel. Its geometry, matched to the KEIL undercut hole, applies maximum loads to the panels in an optimum manner. This geometry ensures stress-free attachment in all commonly used panel materials from 6mm thick. Depending on panel thickness or carrying capacity required, different insertion depths are available. The KEIL undercut anchor is designed in such a way that it withstands a greater load than just the weight of the panel.

The KEIL arguments

>	Highest safety due to many patents and approvals, for example the European Technical Approval (ETA) for the attachment of facade panels.
>	A complete system – technically mature and proven innumerable times.
>	Facade panels as thin as 6 mm – economic and saving resources.
>	Installation independent of temperature and climate with a high degree of pre-assembly in the factory or on site.
>	Position of undercut anchor on the back of the panel can be selected without constraints.
>	Tolerances in panel thickness are simply compensated for by means of spacers.
>	Earthquake tested up to magnitude 9.4 on the open-ended Richter scale.
>	Very high load capacity due to optimum load application, but without stressing the facade panel by lateral bracing = positive ﬁt.
>	Breakage loads are up to seven times higher than for edge attachment (e.g. bolt anchors).
>	Subsequent replacement of individual or all facade panels.
>	Non-ﬂammable, mechanical and permanently safe attachment.